Scan Labels
Step 1 of 7
Scan the barcode labels on the pod housing.
Place your cursor in each field, then scan.
Connectivity Check
Verifying SSH connection to pod...
Ensure the pod is powered on and the LAN cable is connected
from this PC to the pod's LAN port.
LED Test
Step 2 of 7
Verify that all LEDs on the pod are functioning:
Status LED (red/green),
WAN LED (green),
LAN LED (green),
Wi-Fi LED (green)
Do all LEDs turn on and off normally?
Button Test
Step 3 of 7
Press and release the reset button on the pod.
Does the button click properly and respond normally?
Ethernet Test
Step 4 of 7
Testing WAN and LAN link speed (must be 1 Gbps each)
and DHCP server connectivity.
Wi-Fi Test
Step 5 of 7
Configuring pod as Wi-Fi access point, then connecting
from this PC to verify signal and connectivity.
This test takes 15-30 seconds. Please wait.
Appearance Inspection
Step 6 of 7
Inspect the pod housing and product appearance:
- No scratches, dents, or cracks
- All ports and openings are clean
- Labels are properly attached
- Housing is properly assembled
Does the pod pass visual inspection?
Program Device
Step 7 of 7
Writing serial number and MAC address to pod flash memory.
Test Complete